Technical data

8786
CV 80
Ø100
90°
Ø125
Ø125
The demand for the energy consumption of transporting the air in the system must be low,
which requires correctly dimensioning of the ducting.
GUIDE
FOR ORDERING
One verison from each column
can be selected.
FOR EXAMPLE:
A CV 80 is required with extraction from the room to the right,
intake of fresh air through the wall behind the system and
exhaust leading above the ceiling, ducts for both exhaust air and fresh air.
Product name = CV 80 R B T G0
TYPE
CV 80
R
(right side)
L
(left side)
B
(back)
T
(top)
S
(side)
B
(back)
T
(top)
S
(side)
G0
(standard)
2 x Ø125
G1
(extraction grille)
Ø125 + grille
G2
(inlet ow grille)
Grille + Ø125
FLOW
EXTRACTION
INTAKE EXHAUST GRILLE
EXAMPLE 32 PA PRESSURE DROP  Ø125 / Ø100
CV 80
LBB EXTRACTION LEFT  INTAKE BACK  EXHAUST BACK
RBB EXTRACTION RIGHT  INTAKE BACK  EXHAUST BACK
PRODUCT INFORMATION CV 80
EXTRACTION 2
Check valve
EXTRACTION 1
Check valve
EXTRACTION 1
Duct length: 7,25 m
Airflow: 54,0 m3/h
Pressure drop: 18,1 Pa
EXTRACTION 2
Duct length: 10,0 m
Airflow: 26,0 m3/h
Pressure drop: 18,1 Pa
INLET
Duct length: 6,0 m
Airflow: 80,0 m3/h
Pressure drop: 18,1 Pa
INLET
Check valve
INTAKE
Duct length: 6,0 m
Airflow: 80,0 m3/h
Pressure drop: 14,1 Pa
EXHAUST
Duct length: 6,0 m
Airflow: 80,0 m3/h
Pressure drop: 14,1 Pa
INTAKE
Airmaster
wall grille
EXHAUST
Airmaster
wall grille
Reduction
T pipe