Technical data

LevelWave LR01HB EML3020 A-(en)

Other standards and approvals

SIL Compact version only: SIL 2 - according to EN 61508 and for high/low demand

mode operation

EMC Electromagnetic Compatibility Directive 2004/108/EC in conjunction with EN 61326-

1 (2006)

SIL 2-approved devices agree with EN 61326-3-1 (2008) and EN 61326-3-2 (2008)

Radio approvals R & TTE

Radio Equipment and Telecommunications Terminal Equipment Directive

1999/5/EC in conjunction with ESTI EN 302 372 (2006)

FCC Rules

Part 15

Industry Canada

RSS-210

LVD Low-Voltage Directive 2006/95/EC in conjunction with EN 61010-1 (2001)

NAMUR NAMUR NE 21 Electromagnetic Compatibility (EMC) of Industrial Process and

Laboratory Control Equipment

NAMUR NE 43 Standardization of the Signal Level for the Failure Information of

Digital Transmitters

NAMUR NE 53 Software and Hardware of Field Devices and Signal Processing

Devices with Digital Electronics

NAMUR NE 107 Self-Monitoring and Diagnosis of Field Devices

CRN This certification is applicable for all Canadian provinces and territories. For more

data, refer to the website.

Construction code Metallic Horn and Wave Guide antennas: NACE MR0175 / ISO 15156; NACE

MR0103

1 If the process connection temperature is more than 150°C / 302°F and the device has Kalrez® 6375 or FKM/FPM gaskets, the device

will also have an high temperature extension between the converter and the process connection. Kalrez® is a registered trademark of

DuPont Performance Elastomers L.L.C.The process connection temperature must agree with the temperature limits of the gasket ma-

terial.

2 Metaglas® is a registered trademark of Herberts Industrieglas, GMBH & Co., KG

3 HART® is a registered trademark of the HART Communication Foundation

4 Only the 3.6 mA error signal is applicable to SIL-approved devices