Technical data

74
HB EML3020 A-(en)LevelWave LR01
6.4.2 Test
Use this procedure to test the loop current. « xx » in the illustrations shows that you can change
the value or the parameter. Push the keypad buttons in the correct sequence:
Procedure
Screen Step Description
Default screen.
• [>], [] and [>].
• Enter the password: [>], [^], [], [], [>]
and [^].
• [^]
• [].
• [>].
• [>].
• [] to decrease the value or [] to
increase the value.
• [^] to confirm.
This step sets the loop current value. Make
a selection from 3.5, 4, 6, 8, 10, 12, 14, 16,
18, 20 or 22 mA.
• [^] 3 times to go back to the default
screen.
The loop current goes back to initial value.
Default screen.