Technical data

LevelWave LR01HB EML3020 A-(en)

6.3.5 Function description

1.0.0 Information (Info.) menu

No.

Function Function description Selection list Default

1.1.0 IDENT.

1.1.1 SERIAL NUM. The device serial number. Read only.

1.1.2 CONV.FIRM.VER The converter firmware version. Read only.

1.1.3 SEN.FIRM.VER The sensor firmware version. Read only.

1.1.4 HMI.FIRM.VER The HMI (device display screen) firmware

version.

Read only.

1.2.0 OUTPUT I

1.2.1 SUMMARY I This shows the settings at this time for the

output function (OUTPUT FUNC.), output

range (RANGE I), 4 mA setting (SCALE

4mA), 20 mA setting (SCALE 20mA), and

error delay (ERROR DELAY).

Read only.

1.3.0 HISTORY

1.3.1 ERROR RECORD A log of device errors. Push [>] to read the

errors. Push [] or [] to scroll up or

down the list. Each error is identified by a

code. Push [>] again to show the number

of incidents and the time since the last

incident in days, hours, minutes and

seconds. For more data about errors, refer

to Status and error messages on page 81.

Read only.