Technical data

58
HB EML3020 A-(en)LevelWave LR01
6 Operation
6.1 User modes
6.2 Normal mode
This mode shows measurement data. Use the table that follows:
• for the selection of the measurement type (level, distance, percentage, conversion, reflection)
and
• for the selection of the measurement units
Some measurement types will only be available if the device has the correct parameters entered
in the configuration mode.
Keypad functions
Normal mode This mode displays measurement data. For more data, refer to Normal
mode on page 58.
Configuration mode Use this mode to view parameters, commission the device, create tables for
volume or mass measurement, change critical values to measure in difficult
process conditions. To get access to supervisor menu, refer to Protection of
the device settings on page 75. For more data on menu items, refer to
Function description on page 65.
Button Description Function "Hot key" function
Right Enter configuration mode. -
Return /
Escape
Change the measurement units. -
Down Change the measurement type. -
Up Change the measurement type. Display language will change to
English 1
1 The display language will change when you push this button for 2 seconds. Push the button again and it will go back
to the original language.