Technical data

HB EML3020 A-(en)LevelWave LR01

5.3.2 Functions of keypad buttons

For data on keypad functions, refer to Normal mode on page 58.

5.4 Remote communication with PACTware™

PAC Twa re ™ displays measurement information clearly on a computer (PC) and lets you

configure the device from a remote location. It is an Open Source, open configuration software for

all field devices. It uses Field Device Tool (FDT) technology. FDT is a communication standard for

sending information between the system and the field device. Field devices are easily integrated.

Installation is supported by a user-friendly Wizard.

Figure 5-2: Local display screen layout in configuration mode

1 Function name

2 Configuration mode symbol

3 Menu number

Keypad button Function

[Right]

Normal mode: Enter Information menu (Enter Configuration mode)

Configuration mode: Move cursor to the right

[Return / Escape]

Normal mode: Change units (m, cm, mm, in, ft)

Configuration mode: Exit

[Down]

Normal mode: Change measurement type (distance, level , output (%),

output (mA), conversion, ullage conversion, reflection) 1

Configuration mode: Decrease value or change parameter

[Up]

Normal mode: Change measurement type (distance, level , output (%),

output (mA), conversion, ullage conversion, reflection) 1

Configuration mode: Increase value or change parameter

1 If you have made a strapping table in menu item 2.8.1 INPUT TABLE for volume or mass measurement, "Conversion"

and "Ullage Conv." will be shown in the list of measurement types