Technical data

46
HB EML3020 A-(en)LevelWave LR01
Equipment needed
Figure 4-8: Equipment needed to prepare the signal cable
1 Remote coverter
2 Antenna housing
3 Signal cable (supplied on request for non-Ex devices) - for more data, refer to How to prepare a signal cable supplied
by the customer on page 44
4 Small slotted-tip screwdriver (not supplied)
Connections between the remote converter and the probe housing
Figure 4-9: Connections between the remote converter and the probe housing
1 Remote coverter
2 Probe housing
3 Power supply: voltage in -
4 Power supply: voltage in +
5 Signal cable B
6 Signal cable A
7 Shielding wire (attached to Faston connectors in the housings of the remote converter and the probe housing)