Technical data

LevelWave LR01HB EML3020 A-(en)

Equipment needed:

•Device

• Flange gasket (not supplied)

• Wrench (not supplied)

• Make sure the flange on the nozzle is level.

• Make sure that you use the applicable gasket for the flange dimensions and the process.

• Align the gasket correctly on the flange facing of the nozzle.

• Lower the antenna carefully into the tank.

• Make sure that you point the device in the correct direction. Refer to "Point the device in the

correct direction" in this section.

• Tighten the flange bolts.

i Refer to local rules and regulations for the correct torque to apply to the bolts.

Requirements for flange connections

Figure 3-14: Flange connection