manual

for ODD/FDD/card reader
There are two fan control buttons to control two group fans independently
(fan group A & fan group B)
adapt to 3.5” device
for HDD & main board for cable management
for fanfor cooling water hole
for main board positionfor main board foothold
for main board foothold for PSU & main board
1
3
2
2
1
Push fan switch button, it will switch to fan control mode,
the green LED lights
Rotate the fan control button to adjust the fan speed
clockwise: faster / counterclockwise: slower
Clockwise: faster & brighter when it reaches max.
fan speed, LED will blink
when it reaches min.
fan speed, LED will blink
Counterclockwise: slower
& dimmer
If we stop using fan control it will return to
blue LED light
SELECT FAN GROUP A
USB 2.0
USB 3.0
USB 2.0
USB 3.0
SELECT FAN GROUP B
SELECT FAN GROUP A
USB 2.0
USB 3.0
USB 2.0
USB 3.0
SELECT FAN GROUP B
USB 2.0
USB 3.0
USB 2.0
USB 3.0
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Green light
Accessory Kit
Dual-way fan control system
How to install the 5.25”devices. How to install the 3.5”& 2.5” HDD/SSD
How to install the Fan
Remove the front panel
How to install the 5.25”to 3.5”conversion kit
5.25”to 3.5”conversion kit
Insert the conversion kit into 5.25”cage
How to install / remove the 5.25”devices.
Insert the device into 5.25”drive bay it will be locked automatically
Screw
Remove top cover
Push six hooks under the
top cover
3.5”HDD 2.5”HDD/SSD
3
Insert the device into 3.5”HDD bay.
Pull the screw-less grip
remove the 5.25”device
LED will blink
USB 2.0
USB 3.0
USB 2.0
USB 3.0
USB 2.0
USB 3.0
USB 2.0
USB 3.0
LED will blink
A
B
C
B
C
A
Remove
1
2
3
4
5
6
A
C
D
E
SELECT FAN GROUP A SELECT FAN GROUP B
Air In
A
B
x2
FAN GROUP A
Air Out
C
x3
D
E
FAN GROUP B
FAN GROUP A FAN GROUP B
5.25” ODD
Insert
Pull the screw-less grip
remove the conversion kit
The fan control cable can connect with
two group of fans(air in A,B & air out C,D,E)
controlled by the fan switch buttons
FAN GROUP AFAN GROUP B
Fan group A cable max
current loading is 1A
Fan group B cable max
current loading is 1A
Screw
Card reader
Conversion kit
x1 x12
x20
x8
x1
x12
x3
x2
x2
x6
adapt to 3 fans
x2
optional
SELECT FAN GROUP A
USB 2.0
USB 3.0
USB 2.0
USB 3.0
SELECT FAN GROUP B
Blue light
SELECT FAN GROUP A
USB 2.0
USB 3.0
USB 2.0
USB 3.0
SELECT FAN GROUP B
Pull
B
FAN GROUP B
FAN GROUP A
Standby
8secs
Blue lightGreen light
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Push the“START POWER” The blue LED lights when PC power on You can easily install 3.5”HDD or 2.5”HDD/SSD in the top access
external dock
Start Power External 3.5”& 2.5”HDD/SSD dock
3.5” HDD 2.5” HDD/SSD
How to use the hot-swap feature of the external docking:
1.Make sure to install all related drivers that come with your motherboard.
2.Connect the SATA cable to SATA connector on the motherboard.
3.Connect the power cable to power supply.
If your hot-swap device has no function after installation, please refer
to the following settings.
1.Turn on the AHCI function in the BIOS to activate the hot-swap feature.
2.Reinstall your computer operating system.