User Guide

4.4. How Do I Fast Sync the Block-chain?
On the left, view Dashboard → Blockchain Height →Fast Sync
1. Fully Synced Status: when the current local block of the Hotspot has
reached or exceeded the height of the latest snapshot block, it will be
indicated as the "Fully Synced" state, which means that fast sync is not
required.
2. "Fast Sync" Function Button: If the current block height of the Hotspot is
lower than the latest snapshot, the "Fully Synced" button will switch to
the "Fast Sync" status, and the block will be Synced fast after clicking it.
3. “Loading”Status：If the current block height or the block height of the
latest snapshot is not obtained, the status will be displayed as "Loading".
When you see Loading status, please make sure that network is
connected, refresh the page and try again.
4. During the "Fast Sync" process, the latest snapshot file will be
downloaded and added to the Hotspot. However, if the download task
times out, the download stops. Please refresh and try again. It is
recommended to use Internet cable to ensure network speed.
5. In addition, automatic Sync is supported by COTX X3, and the block
height will be periodically checked and automatically downloaded on the
device.
6. During the Sync process, the interface will display the Sync log:
7. Please wait for about 30 minutes (The wait time is depending on your
network speed). Keep the device plugged and connected.
8. When the Sync is completed, the current local block height and total
height will be refreshed, and the block Sync status will be displayed as
"Fully synced".