User Manual

1
3
4
2
5
Cotton Carry-Lite Instructions
1 Cotton Belt
2 Side Holster
3 Shoulder Strap
4 Camera Tether
5 Regular Camera Hub
(for regular body cameras)
6 Angled Camera Hub
(for pro-series & batttery
gripped cameras)
6
1 Attach the Angled Camera Hub
6 if you have a battery-gripped or
pro series camera, OR the Regular Camera Hub 5 to the bottom
of your camera. The arrow on both the Angled Hub and the Regular
Hub should point in the direction of the camera lens. Ensure it is
REALLY tight, and check the hub frequently for any loosening.
2 Attach the Side Holster 2 to the Cotton Belt 1 by opening the
Velcro and wrapping it around the patch area of the belt, and double
locking it with the shorter Velcro strip.
3 Adjust the size of the Cotton Belt 1 and click it together around
your waist with the 3 point buckle.
4 Adjust the length of the Shoulder Strap 3 to go over either of your
shoulders as preferred.
5 Attach the included round Split Ring on your camera’s neck strap
slot, then attach the Camera Tether 4 to the steel D-Ring on the
Shoulder Strap 3 and you are all set for comfortable, secure,
camera carrying!
For information on using your Cotton Carrier with a Tripod, as well as the cleaning of your Cotton Carrier,
visit our website at www.cottoncarrier.com, and go to the INSTRUCTIONS link and the FAQ Page.