Product Specifications

400W Pure Sine Wave Inverter SE400 series
Feature:
Pure sine wave output
Power ON / OFF remote control (Green Terminal)
Remote controller CR-8 (optional)
Input & Output fully isolation
Temperature & Load controlled cooling fan
Built in advance microprocessor to provide friendly interface
Output frequency 50 / 60 Hz selectable by DIP switch
Output voltage DIP switch selectable
Adjustable power saving mode by variable resister
Input protection: Reverse Polarity (Fuse) / Under Voltage / Over Voltage
Output protection: Short Circuit / Overload / Over Temperature
E13 / UL / CE / FCC approved
Model No. SE400-112 SE400-124 SE400-148 SE400-212 SE400-224 SE400-248
North America
(GFCI)
North America
(NEMA 5-15R)
United
Kingdom
UniversalAustralia /
New Zealand
Continental
European
(SCHUKO)
France
Connector
AC Voltage
AC Regulation
Rated Power
Surge Power ( 1 Sec )
Maximum Output Power (1 Min)
Output Waveform
Frequency
DC Voltage
Voltage Range
NO Load Current
Power Saving Mode
Eciency (Max.)
Input Under - Voltage Protection
Input Under - Voltage Recovery
Input Over - Voltage Protection
Input Over - Voltage Recovery
Output Overload
Output Short
Over Temperature
DC Input Reverse Polarity
Operating Temp.
Storage Temp.
Storage Temp. & Humidity
Safety Standards
EMC Standards
E-mark
Accessory (Optional)
LED Indicator
Dry Contact Terminal
Remote Control Terminal
Product Dimension (W x H x D)
Packing
Cooling
Application
Socket Type
Output
Input
Protection
Environment
Safety & EMC
Control & Signal
Others
100 / 110 / 115 / 120VAC
±3%
400VA
<800VA
>400VA~460VA (100%~115%)
Pure Sine Wave (THD<5%@Normal Load
NOTE1)
50 / 60 Hz ±0.5%
12VDC
10.5 ~ 16.0VDC
≤1.8A@12VDC
<0.1A@12VDC
88%
10.5 ±0.3VDC
12.5 VDC ±0.3
16.0 VDC ±0.3
14.5 VDC ±0.3
Shutdown output voltage, restart to recover
Shutdown output voltage, restart to recover
Heat sink temperature over 80°C±5°C, shutdown output voltage, recover automatically after heat sink
temperature goes down to 60°C±5°C
By fuse
-20 ~ +40°C ; 60 °C °C @40% power load
-30°C ~ +70°C
10 ~ 95% RH
Certied UL 458
NOTE3
Certied FCC class B
---
Remote Control: CR-8
Input voltage level, output load level and faulty status
By relay
3-port green terminal
150 x 68 x 187 mm
Per Product1.22kgs ; Per Carton 9pcs /13.93kg /1.45CUFT
Temperature & load controlled cooling fan
Home and oce appliances, portable power equipment, vehicle, yacht and o-grid Solar power systems ...etc.
24VDC
21.0 ~ 32.0VDC
≤1.0A@24VDC
<0.05A@24VDC
89%
21.0 ±0.5VDC
25.0 ±0.5VDC
32.0 ±0.5VDC
29.0 ±0.5VDC
48VDC
42.0 ~ 64.0VDC
≤0.5A@48VDC
<0.05A@48VDC
90%
42.0 VDC ±1.0
50.0 VDC ±1.0
64.0 VDC ±1.0
58.0 VDC ±1.0
---
200 / 220 / 230 / 240VAC
±3%
Pure Sine Wave (THD<5%@Normal Load
NOTE2)
12VDC
10.5 ~ 16.0VDC
≤1.8A@12VDC
<0.1A@12VDC
88%
10.5 ±0.3VDC
12.5 VDC ±0.3
16.0 VDC ±0.3
14.5 VDC ±0.3
Certied EN 60950-1
Certied EN 55022 class B; EN 55024
EN 61000-3-2, -3-3 EN 61000-4-2, 3, 4, 5, 6, 8, 11
Certied CISPR 25 ISO 7637-2
24VDC
21.0 ~ 32.0VDC
≤1.0A@24VDC
<0.05A@24VDC
89%
21.0 ±0.5VDC
25.0 VDC ±0.5
32.0 VDC ±0.5
29.0 VDC ±0.5
48VDC
42.0 ~ 64.0VDC
≤0.5A@48VDC
<0.05A@48VDC
90%
42.0 VDC ±1.0
50.0 VDC ±1.0
64.0 VDC ±1.0
58.0 VDC ±1.0
Note1 - Normal Condition: Vin=12.5V / 25V / 50V Vo=100 / 110 / 115 / 120 VAC 80% Full load (PF=1.0)
Note2 - Normal Condition: Vin=12.5V / 25V / 50V Vo=200 / 220 / 230 / 240 VAC 80% Full load (PF=1.0)
Note3 - UL only for GFCI receptacles