User Guide

2
 Installation Procedure：
1. Refer to the drawing (see Figure 2) for screw hole and cutout dimensions.
2. Use the RJ11 cable between CR8 remote and the inverter.
3. Switch the inverter to REMOTE mode.
Figure 2. CR8 Mechanical drawings (Unit: mm [inch])
4. Drawings of RJ11 Cable (6P6C)
WARNING!
DO NOT use standard telephone cable.
No.33, Sec. 2, Renhe Rd., Daxi Dist., Taoyuan City 33548, Taiwan
Phone：[phone] FAX：[phone]
http：// www.cotek.com.tw
2016.06._A3
Figure 3.
Drawings of CR-8 Remote Control Cables
(Unit: mm[inch])