Specifications

Vertrauen schafft Energie • trust creates energy™
9
SOLAR MPP-TRACKER
fast tracking for a maximum performance
Typ MPPT 100/30 MPPT 100/20
nominal voltage 12V/24V autom. Cognition
nominal battery charge current 30 A 20 A
max.Modulinput voltage 95 V
max. PV-power 450W 12V; 900 W 24V 300W 12V; 600W 24V
max.Battery load current 33A 20A
max. eciency 98,00% 97,00%
consumption of auxiliaries noload „
<30mW bei 12VSystemvoltage (>2mA)
>80mW bei 24V Systemvoltage (>3mA)“
temperaturcompensation minus 4mV/cell *K
cross section cable 32 qmm
dimension 185 x 150 x 115 mm
weight 1,6 kg
operating temperature - 40°C up to +50°C
protection class IP 22
Solar MPP-TRACKER
The maximum power point tracking
technology will boost the efciency of
your system. Inexpensive solar modu-
les that were actually designed for
power feed-in, may be used in these
12V/24V systems. Electronic protection
(polarization, over currents, short
circuits, over temperature )High degree
of efciency – suitable for mounting on
top-hat rails - negative earthing. With
innovative maximum-power-tracking
technology, Phocos‘ MPP-Tracker
ensures maximum performance from
your solar array at all times and in all
weather conditions. The MPPT can
yield an energy gain of up to 30% from
your PV array (with the average gain
being 10%-25%).
When a Central Unit is used, up to 16
MPPTs can be used together in one
system. The charge regulation is then
done via data bus by the Central Unit.
This will enable you to increase your
system capacity substantially. The
temperature-compensated three-stage
I-U curve charge regulation alogarithm
signicantly extends the lifespan of your
battery. The possibility to use less ex-
pensive grid-feed-in solar-panels with
up to 95V open circuit voltage
TT-CM TT-CA TT-CML TT-CX TT-PL TT-CJS
key features
system voltage 12 V 12 V 12/24 V 12/24 V 12/24/32/36/48 V
solar nominal load 4,0 A 5,8A 5,8/10/15/20 A 10/20/40 A 20/40/60 A
load current None 6,8 A 5,8/10/15/20 A 10/20/40 A 20,7/30 A
charge controlling Shunt Serie Serie Serie Serie o. Serie&Shunt
overload
protection
PWM battery load x x x x PWM or on/off technical Details
temperature compensation x x x x PreSet or user spez. on request
balance charging x x PreSet or user spez.
charge increase PreSet or user spez.
ventilated or sealed battery x x by jumper by menue PreSet or user spez.
discharge
contactor
controlling operations voltage voltage or SOC voltage or SOC voltage PreSet or user spez.
Battery deep discharge protection x
informations-
options
display battery and charger 1 LED 3 LED 5 LED Grak LCD Digital LCD
audible alarm x x
manuel safety circuit breaker x
Data control m.opt.PC connector USB RS232C
Safety
reserve palaity protection x no load x x x x
short circuit protection
electr. Fuse
overheat control x x
overvoltage protection x without load x x x x
overload protection
only load PV and load
current reserve x x x x x
other features
night light function x x
external temper. Sensor x x
PCB coating x x x x x
system temperature
-40 °C bis +50°C
max. cable
16 qmm
32 qmm
IP protection class
IP 22
certicate CE CE WeltBank CE WeltBank CE CE
Solar Charge Controller