Specifications

Vertrauen schafft Energie • trust creates energy™
23
Environ-
ment
Working Temp. -20°C - 50°C (refer to output load de-rating curve)
Working Humidity 20 – 90% RH non-condensing
Storage Temp., Humidity -40°C - +85°C, 20-90% RH
Temp. Coefcient ± 0.03% (0°-50°C)
Vibration 10-500Hz, 2G 10min./ 1 cycle period for 60min. Each along X, Y, Z axes
Safety
&
EMC
Safety Standards Certied EN 60335-1, EN 60335-2-29
Withstand Voltage I/ P-O/P: 4242 VDC, I/P-FG: 1768 VDC, O/P-FG: 700VDC
Isolation Resistance I/ P-O/P: 100M Ohms/ 500VDC
EMI Conduction & Radiation EN55022
Harmonic Current EN61000-3-2; EN 61000-3-3
EMS Immunity EN 61000-4-2,3,4,5,6,8,11; ENV 50204
Other Dimensions (WxHxD mm) 179x63x238 179x63x238 179x63x274 208.5x75x
283
208.5x75x
303
179x63x238 208.5x75x
283
208x75x303
Packing 1.6kg 1,7 kg 1.9kg 3.1kg 4.0 kg 1.6 kg 2.9 kg 3.9 kg
ADVANCED BATTERY CHARGER
Modell CX1215 CX1225 CX1235 CX1250 CX1280 CX2415 CX2425 CX2440
Output Battery Type Lead Acid/ Li-ion/ Gel/ AGM
Boost Charge Voltage 14.4V/ 14.7 V 28.8V/ 29.4 V
Float Charge Voltage 13.80V 27.6 0V
Main Rated Current 15A 25A 35A 50A 80A 12.5A 25A 40A
Current Range 0-15A 0-25A 0-35A 0-50A 0-80A 0-12.5A 0-25A 0-40A
Main Output
ESB Output - -
ESB Output/Voltage/ Current 13.8V/ 2A - -
Battery Charging Mode 3-Stage charging capability
Single Output Current Limit 15A 25A 35A 40A 40A 12.5 A 25A 40A
Input Voltage Range 90-264Vac
Power Factor (Typ.) PF>0.92 at full load
Frequency Range 47-63Hz
Efciency Range
Efciency (Typ.) at 230Vac 2.5A/
100Vac
4.1A /
100VAC
6.2A/
100Vac
8.24A/
100Vac
13.3A/
100Vac
4.2A/
100Vac
8.3A/
100VAC
13.3A/
100Vac
AC Current (Typ.) 1.07/ 240Vac 1.8A/
240Vac
2.8A/
240Vac
3.6A/
240Vac
5.4A/
240Vac
1.7/
240Vac
3.6A/
240Vac
5.4A/
240Vac
Leakage Current For earth < 1mA/ 240Vac
Protection Short Circuit Current is reduced to < 1A coninued 30sec., fan will operate 30seconds then turn off
Over Voltage 17.5V ± 1% 35V ± 1%
Protection type: Shut down output (recovery after resetting AC power on)
Over Temperature 100 ± 5°C detected by heat sink
Protection type: shut down output (recovery after heat sink temperature goes down to 50° C)
Battery Over Temperature 52 ± 5°C (optional device – temperature sensor)
Function Alarm Signal NC./ NO. Relay contact output
Communication RS232 Communication protocol
Temperature Compensation -10mV/ 0.5°C provided by optional device - Cotek temperature sensor -20mV/ 0.5°C provided by optional device -
Cotek temperature sensor
Charging Sleep Mode By remote control and DIP switch (low noise mode)
Remote Control 3 colour LED and botton for ON/ OFF and Sleep mode control