USER'S MANUAL 54” Soccer Table Model: SP35344
SP35344 PARTS LIST 1 2 3 End Apron 2 Pieces 6 Goal End Board 2 Pieces 7 4 x 10mm Round Head Screw 64 Pieces 21 17 4 x 45mm Flat Head Screw 4 Pieces 22 3-Hole Rod 4 Pieces 26 Handle 8 Pieces 31 32 Pre-installed Square Nut with Screws 4 Pieces 37 Pre-installed 33 Pre-installed Plastic Rod Bushing 16 Pieces 20 5-Hole Rod 2 Pieces 29 Ball Return Cover 2 Pieces 1 4mm Nut 26 Pieces “L” Bracket 16 Pieces 35 Allen Key 1 Piece 39 2-Hole Rod 2 Pieces 30 34 Pre-installed 25 Score
A SSEM B LY I N ST RU CT I ON S 1. Find a clean, level place to begin the assembly of your Soccer Table. The table will be assembled upside down and then turned over on its legs once the assembly completed. This game table is heavy, and turning it over will require at least two strong adults. 2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list.
FI G.3 6. Place the Playfield (#6) in the center of the cabinet. Attach it to the Side Aprons (#4) using ten Screws (#13) and attach it to the Goal End Boards (#2) using eight Screws (#13). FIG. 3 13 4 6 4 2 FI G.4 7. Attach the “L” Brackets (#30) to the End Aprons (#1) using two Screws (#11) per Bracket as shown in FIG.4A. 8.
FI G.5 9. Attach the Goal Boxes (#5) to the End Aprons (#1) using two Screws (#12) per Goal Box. 10. Place the Support Braces (#9) on the Playfield (#6) and attach them to Side Aprons (#4) using two “L” Brackets (#30) and eight Screws (#11) per Support Brace. FIG. 5 30 5 11 4 12 9 4 6 1 FI G.6 11. Attach the Left and Right Legs (#7 & #8) to the corner of the cabinet using four Bolts (#14) and four Washers (#24) per Leg. 12. Screw the Leg Levelers (#31) into the bottom of each Leg. 13.
FI G.7 14. Slide the Player Rods ( #19-21) through the Rod Bushings (#37) on one Side Apron (#4) in the order as shown in Fig.7 and 7A. Note: The player Rods have a hole at their end where the Handles (#26) will go. 15. Place the Rod Bumpers (#32), Rod Washers (#33) and Players (#22 and #23) onto the Player Rods (#19, #20 and #21) in the order as shown in Fig.7, 7A and 7B. 16. Now insert the Player Rods through the Rod Bushings (#37) on the opposite Side Apron (#4). 17.
FIG.8 18. Place the Handles (#26) onto the Player Rods with a hole at their end. And then place the Rod End Caps (#27) onto the other side of the Player Rods. 19. Attach the two Scorers (#29) to the Top Slat Board (#3) using two Screws (#16) per Scorer. FIG.
UNITED KINGDOM CANADA RUSSIA GERMANY FRANCE ITALY UNITED STATES JAPAN SPAIN AUSTRALIA TIPS： Your suggestions and comments for Costway are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below: Great products so far February 24, 2018 Great product so far. Fast delivery, easy setup, and working without any issues.
