Use and Care Manual
Dimension and Clearance
Top hood and cabinet specifications
Condition Minimum
clearance allowed
Clearance between the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet for any model other than
35”
Clearance between the top of the cooking surface and the bottom wood
or metal cabinet that is protected by not less than:
1/4-inch-thick flame-retardant mill-
board covered with not less than:
o
No. 28 MSG sheet steel or
o
0.015-inch-thick stainless steel or
o
0.024-inch-thick aluminum or
o
0.020-inch-thick copper
24”
Duel fuel ranges clearance between the top of the cooking surface and the
bottom of an unprotected wood or metal cabinet for models FP10543
40”
20