Use and Care Manual
4
www.costway.com
5
www.costway.com
ITE
T
.
10
11
12
13
14
15
SPECIFICATION
Battery(AAA)
Regulator
ITE
T
SPECIFICATION
PVC Cover
1 Box(3KG)
9
9
Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator from
the () to the cylinder valve by
turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by
hand only.
Remove the rubber cap on the
electronic igniter
() by unscrewing and slide battery (2)
into the battery slot. Make sure the
positive side of the battery faces
outwards. Screw the electronic igniter
cap () over the battery tightly.
1
2
2
Check that the control knob (11)
for the gas supply system is
turned to the “OFF” position
before starting any assembly.
11
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
REGULATOR
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
turn clockwise
to reseal