Warranty

PRODUCT ASSEMBLY PRODUCT ASSEMBLY
04 05
MASSAGE CHAIR
READ ALL INSTRUCTIONS
BEFORE USING THE ITEM
PRODUCT FEATURE
 2 Vibration Motors
 8 Massaging modes
 Adjustableintensity
 One massage zones
 The default timing is 15-30 min
HOW TO USE
1、 Insert adapter jack into the socket found on back of the massage
cushion, then plug the adapter into a wall outlet(see Figure A)
Figure A
2、 Turn the unit ON by pressing the POWER button once, The LED
will illuminate when power is on.
3、 Turn on the massage in each zone by pressing the Massage zone.
LEDs will illuminate when each zone is activated. To turn off a
zone, press the button again.
4、 To choose a desired massage mode, press the M
ODE button. To
change modes, press MODE button until LED for desired mode
illuminates
5、 To change the massage intensity press the INTENSITY button. The
LED for HIGH or LOW intensities will illuminate when chosen.
NOTE：Discontinue use immediately if you feel any discomfort or
pain.
6、 NOTE: for your benefit, the massage chair is equipped with an
auto shut-off feature that will turn the chair unit off after 30
minutes of continuous use.
7、 DO NOT us
e for more than 30 minutes of continuous use.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
1、 This product is for use on a 12V circuit Make sure that the product