Use and Care Manual

7
the heater shuts off - you will hear a “click”. The thermostat will now maintain the temperature by
cycling the heater on or off as required. Once the room is comfortable, select a lower power setting
at either [I or O] or [II and O] to reduce electrical consumption and to prevent the room from
becoming too warm. During particularly cold weather, the low setting at I or II power setting(s) may
be insufficient to maintain the temperature set at the thermostat. Select [I and II] for these periods.
To turn off heater, press both switches down to O.
SAFETY FEATURES OF THIS HEATER
Thermal Cut-Off: The heater will automatically shut off when parts of it overheat. If this occurs, turn
the heater OFF and unplug it. Inspect the unit, and remove any objects that are on or adjacent to the
unit that may cause overheating. Wait 15-20 minutes for the unit to cool down. Then plug it back into
the outlet in order to resume normal operation.
SPECIFICATIONS______ _______________.
Model Number EP22913
Power Supply 120 volts AC, 60Hz
Power Consumption
600W (low heat setting)
900W (medium heat setting)
1500W (high heat setting)
CLEANING AND STORAGE_ _______........
Before any cleaning, make sure that the heater is turned off and plugged from the power source.
Regular Cleaning:
1. Prepare a mild detergent-water solution. Do not use cleaning liquid or other chemicals to spray
directly on the unit.
2. Use a clean, soft and lightly damp cloth to gently wipe off the dirt from the surface of the unit
only.
3. Do not attempt to open the heater to clean it. Doing so will damage the unit and void the
warranty.
NOTE: THE FINS ARE PERMANENTLY SEALED AND DO NOT REQUIRE ANY OIL CHANGE.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS
COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.
STORAGE
1. Perform the cleaning procedures described above.
2. Wipe all parts to dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.