Use and Care Manual

• After pressing the "ON/OFF” switch, this popcorn maker heats immediately.
To avoid overheating, add raw popcorn before turning ON.
• This popcorn maker will NOT shut off automatically. To turn the popcorn
maker OFF, press the “ON/OFF” switch to OFF. Then remove plug from wall
outlet.
• Extreme caution must be used when moving an appliance containing hot oil
or other hot liquids.
• Extreme caution must be used when removing popped popcorn. Always flip
the unit away from you and over a countertop.
• Allow unit to cool completely before popping a second batch.
• Never place the popcorn maker's clear lid, plastic lid cap, or rotating rod in
a microwave oven.
• In case of technical problems, switch off the machine and do not attempt to
repair it yourself. Return the appliance to an authorized service facility for
examination, adjustment or repair. Always insist on the use of original spare
parts. Failure to comply with the above mentioned precautions and
instructions could affect the safe operation of this machine.
•
BE CAREFUL WITH HOT SURFACES: This appliance
generates heat and emits steam during use. Proper precautions must be taken
to prevent the risk of burns, fires or other injury to persons or damage to
property.
•
CAUTION: This popcorn maker is hot during operation and retains heat
for some time after turning OFF. Always use oven mitts when handling hot
base and allow it to cool before cleaning. Do not place anything on top of the
appliance while it is in operation or while it is hot.
KNOW YOUR
POPCORN MAKER
1. Lid cap
2. Clear popcorn maker lid
3. Lid handles
4. Popping Plate
5. Center Knob
6. Rotating Rod
7. Base handles
8. Popcorn maker base
9. ON/OFF switch
SPECIFICATIONS
Capacity: 5.0L (24 Cups / 240ml per cup)
Voltage: 120V/60Hz
Wattage: 850W
USING YOUR POPCORN MAKER
You must read all instructions carefully before using this appliance.
• Remove all packing material and please check carefully, making sure that
your popcorn maker is in good condition. It must have no cracks on the unit
and no damage to the cord/plug. Do not discard any packaging until all
accessories have been found.
• You must confirm that the voltage indicated on the popcorn maker
corresponds with the voltage in your home.
• Remove any adhesive labels or stickers before use.
Before using for the first time
1. Carefully unpack the popcorn maker and remove all packaging materials.
2. Wash lid cap, popcorn maker lid in warm soapy water; rinse and dry
thoroughly.
3. Place the base on a clean, flat, heat-resistant working surface.
CAUTION: During popping, the base gets hot. Make sure the surface is able
to withstand heat or use a trivet to protect the working surface.
04 05