User Manual

6: Floor brush and floor brush towel
When cleaning the floor, connect two or three extension tubes together to the steam
machine. The other end of the extension tube is installed with floor brush. The extension
tube is directly connected to the connector of the floor brush, open the clips on both
sides of the floor brush and fix the towel.
1. Clean the surface of the machine, please clean with a wet cloth, do not use detergent.
2. Please pour out the remaining water in the tank before storing.
3. The main machine and accessories are stored in a dry place away from light after
natural drying.
If any abnormality occurred during the operation, please send the machine to the
designated maintenance department for repair. Do not repair by yourself, which is
dangerous.
Maintenance
Common troubleshooting
Status
Please check following
the key points as below
Method of exclusion
No steam spraying
out
Water coming out of
the nozzle
1.The power plug is not
connected well to the socket
2.Water tank out of water
3.Water pump is working but
no steam is coming out. The
pump may be blocked.
Every time start using
steam, hot water will flow
out. No steam spray for a
long time, the tube is cool
and the steam condenses
into water in the tube.
1.Reconnect or replace the
socket
2.Add water to the tank
3.Find a professional person
to repair the machine
It is normal, because the
connecting tube is neces-
sary, and there must be
condensed water. If don't
need a lot of water for
cleaning, spray it into a
container.
Voltage:120 V
Frequency: 60 Hz
Power: 1400W
10 11