Use and Care Manual

Special safety Instructions for this Machine
● Only operate this machine under supervision.
● Do not interfere with any safety switches.
● Do not insert anything into the rotating hooks while the machine is working.
● Place the machine on a smooth, flat and stable working surface.
● Do not insert the mains plug of the machine into the power socket without having installed all the
necessary accessories.
● Only the pusher should be used for refilling the mincer.
● Danger of overloading! Please use the device either as a mincer or mixer, but never both functions
at the same time.
Overload Protection System
The motor is protected from burning out by a Thermal Protector. If the appliance is overloaded
or operated continuously for too long, the motor may overheat and stop. To operate the
appliance again, it must be switched off and disconnecte
d from the power socket then left for at
least 30 minutes. Once the motor is fully cooled the appliance may be used again.
Safety System
The motor will not start if the Mixer Head is raised.If it is raised during normal operation,the
safety switch will activate and the motor will shut off immediately.
Additionally,if the appliance is plugged in while the speed control is not set at 0,the safety
system will prev
ent it from running.
In either case,to start the machine again,return the head to the locked position and turn the
Speed Control back to 0.The appliance should now function as normal.