Installation and operation washing 1. Install the machine on a firm and fist floor (allow most bl que angles to 2°) If the machine Is not leveled, the machine may males a big vibration and noise. 2. Suspend the rein hose on the hose hook at the right side of the making; lay the rein hose down ‘when you want ta discharge water. 3. Set the water supply hose connect one rubber packing of the water supply hose to the end of the connect the other one to the water supply port an the machine.
operate Dehydrated please click below operation method: 1. Alter washing, pipe down to drain the water. 2. Put the clothes what need to spin Into the dehydration basket, after lawsuits, put the safety cover gently pressure acne, then put the beset into the body of washing machine, make the bottom and pulsar firmed and fixed. 3.
guile 1. Suspend the drain hose again, put the laundry Into the tub, and then let water flow Into the tub at the proper level. 2. Set the rinsing time by muting the washing timer, normally, the rinsing teems Is set to around 5 minutes. 3. After rinsing time Is complete, drain the water by laying down the drain hose and twist the laundry. 4. Repeat the above steps for 2 ta 3 times. (6). Maintenance 1. Removal the power cord after washing 2. Wipe the water clean and dry with a soft cloth 3.
12. Do not wipe the machine with the volatile material, geosyncline, eis. 13. Let water drain away from the drain water Intel the tub. 14. Do not pour aver 50 egress (122F) water Into the tub. 16. Broken-power cord must be remove by specialist.
