Use and Care Manual

7
7. Carefully install the glass tube by lifting up
and inserting through the center hole in the
upper plate. Ensure the black silicone ring is
attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the
hole of the lower plate cover and onto the
control box assembly. Check and ensure that
the glass tube is positioned properly and is
completely covering the center hole of the
control box assembly.
To aid in installation
place black silicone
ring on the control
box assembly and
then install glass
tube. Ensure the rim
of the glass tube sits
firmly in the black
silicone ring.
WARNING! The black
silicone ring must be in place
prior to operating the heater.
BLACK SILICONE
RING
8. Assemble the protective guard.
Hang the hooks of the protective guard (E)
onto the holes in supports.
Secure the protective guards with fixing
brackets (HH) with 4pcs 3/16" screws (DD).
Hardware Used
8
E
DD
HH
DD
JJ
x 4
Philips
screwdriver
3/16” Screw
x 1
HH
Fixing
Bracket
x 4
16