Use and Care Manual

5
5. Assemble the flame screen (B) to the upper
support (D).
Secure the flame screen to the upper support
using 8pcs screw 3/16”(DD).
B
D
DD
Hardware Used
DD
JJ
x 8
Philips
screwdriver
3/16” Screw
x 1
Hardware Used
6
6. Assemble the reflector (A) onto the flame
screen (B).
Screw the 3pcs stud (CC) on the flame screen,
put 3pcs washer Φ6 (BB) onto the top of stud,
then put the reflector onto the stud, secure
them with 3pcs washer Φ6 and 3pcs wing
nut (AA).
AA
A
BB
CC
x 3
x 3
x 6
AA
BB
Wing nut
Washer Φ6
CC
Stud
15