Use and Care Manual

Hardware Used
EE
FF
II
Hardware Used
1
2
1. Assemble the wheel assembly (M) to the
bottom plate(N). Fix the wheel assembly to the
bottom plate using 4pcs bolt M6 x 12(EE) and
4pcs flange nut M6 (FF).
2-1. Unscrew the switch button, load small
battery, tighten the switch button.
2-2. Insert the pins of the base to the holes of
lower support (K), press to secure the pins.
Using 4pcs screw M5 x 12 (GG) to secure the
lower support and base.
Insert the pins of the control box assembly (J)
to the holes of upper support, press to secure
the pins. Using 4pcs screw 3/16” Screw(DD) to
secure the lower support and control box assy.
x 4
x 4
Wrench
x 1
M
EE
FF
J
GG
DD
OO
K
GG
JJ
x 4
Philips
screwdriver
x 1
Bolt M6 X 12
M6 Flange nut
Screw M5 X 12
DD
x 4
3/16” Screw
AA Battery (1.5 V)
N
ASSEMBLY INSTRUCTIONS
13