User manual

Figure 1-1. The Labelwriter printer comes with these items: printer, power
transformer, serial cable, roll of lab& user manual.
Where to put
your printer
Before setting up your Labelwriter, take a few moments to
consider where you plan
to put it. Of course, we can’t cover all
possible setups, but there are a few general guidelines you might
consider.
Be sure there’s enough room around the printer to allow labels
to flow out freely.
Avoid placing the printer in areas where sudden, severe changes
in temperature and humidity occur.
Avoid areas with direct sunlight, dust and grease.
Pick a clean area.
Select a steady source of electricity and check for other appli-
ances which may be using the same circuit. Copiers, heaters, air
conditioners and other motorized equipment can cause power
fluctuations which may interfere with your printing.
Use a surge protector.