User manual

Select COM I or COM2 depending on which port your
Labelwriter
is connected to. Then click on Configure Port.
Set Bits per second
to 19200.
Set Data bits
to 8.
Set Partity to None.
Set Stop Bits to
I
Set Flow Control to XON/XOFF.
Then click
on the OK button.
You
will see the name Labelwriter XL in this screen. This is cor-
rect whether you are using an XL, XL Plus, BC or BC Plus. Leave
the
NO button clicked on the lower part of your screen. Then
click on the Next button.
~
~