User manual

Since the Labelwriter XL print driver does not come with
Windows, you
will have to install it from the floppy disk that came
with your Labelwriter.
(Disk 2 if you are using AddressMate
Software.) Click on the button called Install at the lower right
hand corner
of the open window.
~ ~~ ~~~ ~~~ ~ ~~~~~ ~~~~~~~~~ ~~~~ ~~~
Insert your Labelwriter driver disk into Drive A or Drive B and
make sure
to type in either A\ or B:\ in this screen. Then click
OK.
Insert unlisted, updated, or
vendor-provided printer driver dirk in:
Windows will search the disk and bring up a list of drivers. Select
the driver called Costar Labelwriter XL and click
OK.
After a few seconds the driver will be installed and will appear on
the screen in the Installed Printers section. Click on the name
Costar Labelwriter XL under the Installed Printers section.
Now
you must configure the driver so it knows which port the printer
is connected to.
Default Printer
r HP LaserJet 4t4M PostScript on LPTl:
. .. . . - . ... ... . . .
-
HP LaserJet 414M PostScript on LPTl:
HP LaserJet on LPT1:
I I
m.. --...