User`s manual

Web Admin User’s Manual
80 Costar Video Systems, LLC
can be also recorded in your device.
You can find out the list of servers with recording capability by clicking Recording Configuration.
For example, you will see 12 channels from the list of VS Module ID (IP Devices) after adding two
FW-3450 devices in IP Devices Registration of FW-5450. That means, FW-5450 can record the
video sent from other remote cameras, as well as the four local cameras attached.
Below is an example of configuring the motion detection-triggered recording for FW-5450 model. It
starts by clicking Recording Configuration.
It displays the information of the recording-capable servers such as VS Module ID (IP Devices), Server
Name, Server IP Address, Service Port Number, Vendor, Camera Name, and Record ability. To
configure, select a camera according to your need.
Below is the Recording Configuration screen when Camera 1 is selected from Module ID (IP
Devices) 0, which is attached to the FW-5450 device.
Click on Camera 1, and it will display the screen for detailed configuration such as recording speed,
camera name, Pre- and Post-alarm image speed. After configuring them properly, click the Save
button to save the change.