User`s manual
Web Admin Userās Manual
79 Costar Video Systems, LLC
After formatting is finished, the following window will appear informing it. Click the OK button.
On SD Status & Format window, you will be able to see that the 1
ST
SD is shown formatted. After
formatting SD card is finished, click the Reboot button to restart the system.
After about 30 seconds, the system will be rebooted. You will be able to see the following information
when you log in to the Admin web page of the Costar Video server.
7.3. Recording Configuration for FW-5050/5071/5450/5850 & FW-
1170/1173/1175/1176 with microSD Slot
Each camera can be configured for recording option in this section. Configuration items include
motion detection recording, 24-hour continuous recording, event-driven recording, and etc. If other
vendorās products are added in the previous IP Devices Registration section, those camerasā video
Note: If the program is terminated during the format process, the SD card may be
damaged. To avoid this problem, make sure to close the program in the right
manner and check the SD card.