User`s manual

Web Admin User’s Manual
57 Costar Video Systems, LLC
SPECIAL (* Refer to the table below) -
EXIT Exit from Menu Mode and save settings.
Special Menu Function Description
CAMERA ID (Name of the camera) Use up to 15 Alphanumeric and space
COLOR AUTO / ON
AUTO: Automatic switch of Day & Night Mode
(Day-time: Color Mode; Night-time: B/W mode)
ON: Operate in COLOR mode always.
SYNC INT / LL
LL: Adjustable between 0 - 359º
Trigger Signal: Auto Sensing.
Motion
Detection
OFF / ON
ON: Define 4 adjustable positions and sizes.
When any motion is detected, it displays MOTION
DETECTED on the screen.
PRIVACY OFF / ON ON: Define 4 positions, sizes, contrasts.
MIRROR OFF / ON Mirroring (Horizontal Image reversing)
SHARPNESS OFF / ON Adjustable between 0 - 31.
RESET Reload the factory default condition.
RETURN Return to SETUP menu after savingsettings.
5.3.7. Mega Pixel Camera Control for FW-1173-MM/1175-MM/1176-MM
• Max Exposure Time: Select the exposure duration of the image sensor.
• Brightness: Select the brightness level of the screen.
• Noise Filter: Select Enable to use the noise filter.
• Sharpness: Select from 5 presets (Blur, Smooth, Normal, Enhanced, Sharp)
5.4. DI (Sensor Input) / DO (Alarm Output)
Select DI/DO from Device Configuration menu to configure Sensor Input and Alarm Output. After
the setting up, select DI Status/DO Control on Device Configuration menu to configure the
behavior of those Input and Output ports.
DI/DO Setup DI/DO Control