User`s manual

Web Admin User’s Manual
52 Costar Video Systems, LLC
Configure the video data format and other information to be contained in it.
• Default Video Format: Video transmitting format of the camera attached to Costar Video
Server. Select one from NTSC or PAL.
• Video with UART sensor Data: If Enabled, video data will contain UART sensor data from
COM port.
• Video with user defined message: If Enabled, video data will contain the user-defined data.
(Reserved Field)
• Video with PPP status: If Enabled, video data will contain PPP connection status.
• Video with camera name: If Enabled, video data will contain the camera name.
• Video with server name: If Enabled, video data will contain the server name you defined.
• Video with IP address: If Enabled, video data will contain the IP address of the video server.
• Time Stamp: If Enabled, encoded video image will have the time display on it.
• Image Size: Select the resolution of each channel’s video data.
• Encoding Frame Rate (per channel): Video compression rate per second. You can control
the total network traffic of the server with this parameter.
• Encoding Standard: Select the compression method of each video, either M-JPEG or H.264.
• Watermark (MPEG-4 Only): If enabled, MPEG-4 video will have the watermark blended on the
image. This is applied on all the other settings.
Below is the table of images sizes supported in this mode.
Video Format D1 2CIF CIF QCIF
NTSC 704 x 480 704 x 240 352 x 240 176 x 112
PAL 704 x 576 704 x 288 352 x 288 176 x 144