User`s manual

Web Admin User’s Manual
49 Costar Video Systems, LLC
(Reserved Field)
• Video with PPP status: If Enabled, video data will contain PPP connection status.
• Video with camera name: If Enabled, video data will contain the camera name.
• Video with server name: If Enabled, video data will contain the server name you defined.
• Video with IP address: If Enabled, video data will contain the IP address of the video server.
• Time Stamp: If Enabled, encoded video image will have the time display on it.
• Image Size: Select the resolution of each channel’s video data.
• Encoding Frame Rate (per channel): Video compression rate per second. You can control
the total network traffic of the server with this parameter.
• Encoding Standard: Select the compression method of each video, either M-JPEG or MPEG-4.
• Watermark (MPEG-4 only): If Enabled, video image will have water mark on it when the
Encoding Standard is set to MPEG-4. This attribute applies to all the channels.
Below is the table of images sizes supported in this mode.
Click Apply button to save the changes.
Camera Configuration
On the lower part of Camera & Motion Configuration menu, select a channel you want to
configure. Then, enter the detailed parameters of the camera selected here.
Video Format D1 2CIF CIF QCIF
NTSC 704 x 480 704 x 240 352 x 240 176 x 112
PAL 704 x 576 704 x 288 352 x 288 176 x 144