User`s manual

Web Admin User’s Manual
44 Costar Video Systems, LLC
Motion Detection
• Motion Detection: If enabled, Motion Detection feature is activated and user can configure the
areas where motion detection function will work. (this is only available in Primary Stream)
• Motion Sensitivity: Set the sensitivity of motion defined in Motion Detection Area. Select
between -100 and 100. 100 is the most sensitive.
After all the setting is done, click Apply button to save it. If Default button is clicked, all the fields
return back to original value.
5.3.2. Camera & Motion for FW-3170/1161/1177/1178
This menu is used to set up the selection of video format, data added to video data, encoding speed,
audio control, image resolution, video quality, motion detection, and etc.
Click Camera & Motion on Device Configuration menu, then the following window will be displayed.
Configure the video data format and other information to be contained in it.
Note: The image size of Primary Stream is the maximum size of the Secondary Stream,
because Secondary Stream’s video soFlxwatche is the output of the Primary
Stream.
Note: For Dual Stream products, most of parameters are dependent on primary stream
value.