User`s manual

Web Admin User’s Manual
29 Costar Video Systems, LLC
• Serial Input Model: You can select the sensor’s model number to use for Serial Input.
The following example is when a speed sensor, AGILIS-HE820-SINGAPORE, is selected.
• Upper Limit: The highest value in the range to assign
• Lower Limit: The lowest value in the range to assign
• Initial String Length: The length of initial string from sensor
• Initial String Data: The initial string from sensor
• (Speed) Delay: select Enable if sensor input needs delay
• Internal process delay: The amount of delay for sensor input
• Sensor Aiming Position: The position for sensor to aim
• Camera Aiming Position: The position for camera to aim
• Add Vehicle length to calculate delay time: The length of vehicle for applying delay time
5.1.2. Serial Output Mode
Using Serial Output Mode, you can send UART device commands to Costar Video® Server in order to
control PTZ devices, Multiplexer, Access control box, X10 Protocol, z256 protocol by RS-232 or RS-
485/422 communication. In the picture below, serial output mode can be selected among By-Pass,
X10, or Z256.
Note: If additional sensors need to be added, it will require installation of the device
drivers.