Use and Care Manual
28
Replacing the Filter
After a period of use, the lights over the
CRISP and ROAST buttons will flash and
“Replace Filter” will show on the display to
indicate that the filter needs to be replaced.
1. Open the grill lid or press any button to
stop the indicators.
2. Remove the filter cover and remove the
filter from the back of the grill.
3. Insert a new filter into the back of the
grill with the pull tabs facing outward.
Replace the filter cover.
4. Press and hold the CRISP and ROAST
buttons at the same time for 5 seconds.
The grill will beep and “Reset Done” will
appear on the display.
Note: The grill will still operate when the filter needs
to be replaced, but will not capture smoke or odors
as eectively. For best results, replace the filter every
6 months or after approximately 60 uses.