Use and Care Manual

19
Crisp Function (“CRISP”)
This function is ideal for cooking a variety
of food, including French fries and chicken
wings. Uses high heat and airflow.
1. Place the cooking pot into the base of
the grill, followed by the basket.
2. Close the lid, press
, then press
CRISP.
3. Optionally, customize the temperature
and time.
a. Press TEMP to control temperature.
Use +/– to adjust the temperature
between 300°–450°F / 150°–230°C.
b. Press TIME to control time. Use
+/– to adjust the time between 1
min–60 min.
c. If you would like to bypass
preheating, press PREHEAT to
deselect the preheat function.
4. Optionally select SHAKE to add a Shake
Reminder.
a. If selected, the Shake Reminder will
remind you to flip your food halfway
through cooking. The grill will beep
and SHAKE will flash on the display.
b. Press to resume cooking after
flipping your food.
c. Be extremely careful when flipping
food, as it may be very hot. Use oven
mitts or heat-resistant gloves, as
well as tongs or other utensils, to flip
your food.
5. Optionally, select KEEP WARM to have
the Keep Warm function turn on after
your food is done cooking.
a. Customize temperature and time
settings for Keep Warm in the
VeSync app while food is warming
or cooking is paused.
6. Press to start cooking.
7. When preheating is complete, the grill
will beep and READY will flash on the
display.
8. Carefully lift the lid using the handle
while wearing oven mitts or heat-
resistant gloves and place food into the
grill. The grill will automatically pause
heating while the lid is open.
a. Do not overfill the basket.
b. For best results, add food up to one-
third of the basket’s capacity.
9. Close the lid and resume cooking. The
display will light up to indicate that your
food is cooking.
10. When cooking is done, the grill will
beep and END will show on the display.
Carefully remove food and leave the lid
open so that the grill can cool.