Use and Care Manual
7
DISPLAY
BEFORE FIRST USE
Setting Up
Controls
1. Remove all packaging from the dehydrator and its accessories. Make sure all package
contents are included (see page 3).
2. Clean the housing, trays, and tray liners with a moistened cloth.
• Press START/STOP to start or stop the dehydrator.
• Press TEMP/TIME once and use the + and – buttons to change the temperature.
• Press TEMP/TIME a second time and use the + and – buttons to change the time.
Note: The trays are dishwasher safe. Do not wash the mesh screen or fruit roll sheet in a dishwasher.
Note: You only need to do this the first time you use the dehydrator.
3. Place the dehydrator on a solid, level surface. Plug in. Place the trays inside the dehydrator.
4. Run the dehydrator for 30 minutes at any temperature, without adding any food. Make
sure that the room has sucient ventilation in case the dehydrator produces any smoke or
smells. This is normal.
5. Rinse the trays with water. Dry all parts.