Use and Care Manual

23
1. Insert wire rack at mid position and
close the oven door.
2. Turn the control knob to “PIZZA”, which
will blink on the display. Press the
control knob to confirm your selection.
3. Optionally, customize the temperature
and time. You can do this anytime
during cooking (except during
preheating).
4. If you selected PREHEAT, press
to begin preheating. The button
will light up, and the display will
show “PREHEAT”. When preheating
completes, the oven will beep several
times, the display will flash, and the
button will blink continuously.
7. The oven will stop heating and beep
several times when finished.
5. Remove any cardboard, plastic, paper,
or other flammable materials. Place
pizza on a pan, and place the pan on
the wire rack.
6. Close the oven door and press
to begin cooking. (If you selected
PREHEAT, the oven will start cooking
immediately when you close the oven
door.) The button will light up, and
the display will show the timer counting
down.
Pizza Function (“PIZZA”)
This function melts and browns cheese and
toppings while crisping crust.
Heating Elements: Top and bottom heating
elements cycle on and o.
Rack Position: Mid
a. Press once to control temperature.
Turn the control knob to adjust the
temperature between 150°–450°F /
66°–232°C.
b. Press again to control time. Turn
the control knob to adjust the time
between 1 min–2 hr.
c. If the oven is not heated, press
PREHEAT to add preheating.
Note: For large pizzas, open the oven door halfway
through cooking and carefully turn the pizza 90
degrees for more even browning.