Use and Care Manual

8
Light/Unit Button TIME/TEMP Knob
Fan Button
START/CANCEL Button
FUNCTION Knob
• Turns the interior light on/o. will
show on the display.
• The interior light will turn on automatically
when there is 1 minute left of cooking time.
Press to turn the light back o.
• Press and hold to switch temperature units
between Fahrenheit and Celsius.
• Turn the knob to change time/
temperature. Turn clockwise to increase,
and counterclockwise to decrease.
• Press the knob to switch between
controlling time and temperature. By
default, the knob will control time.
• Time will adjust in increments of +/– 1, 5,
10, or 15 minutes (see chart).
• Temperature will adjust in increments of
+/– 5°F.
• After a time or temperature setting is
selected, the number will flash 5 times
on the display before the setting is
confirmed.
• Display On/O: Press and hold the knob
until the display turns on/o.
• Cycles through fan speeds: normal, high,
and o.
• The fan can be used for all cooking
functions except Toast and Bagel. The
fan is automatically set during Air Fry and
Dehydrate.
• Press and hold
until starts blinking.
This will let you pair your toaster oven with
the VeSync app. See the VeSync in-app
instructions for more information.
• Starts or cancels a cooking function.
• If preheating, cancels preheating and
starts the cooking function.
• Blinks when the oven has finished
preheating. Press the button again to start
the cooking function.
• Lights up when the oven is heating.
• Turn the knob to choose a cooking
function. The selected function will blink
on the display.
Note:
• If the oven is inactive for 30 minutes, it will
turn o automatically. Use any control to wake
up the oven.
CONTROLS
Pizza, Bake, Roast, Air Fry,
Broil, Cookies, Rotisserie, Warm
Below 60 minutes
+/– 1-minute
increments
1–2 hours
+/– 5-minute
increments
2–3 hours
+/– 10-minute
increments
Above 3 hours
+/– 15-minute
increments
Dehydrate, Ferment
All times
+/– 30-minute
increments
Time Increment Chart
Note: This also will reset your toaster oven in the
VeSync app.