Use and Care Manual

98
3. Pull the basket handle to remove the
baskets. Remove all plastic from the
baskets.
4. Press the basket release button to separate
the inner basket from the outer basket.
5. Wash both baskets thoroughly, using
either a dishwasher or a non-abrasive
sponge.
6. Wipe the inside and outside of the air
fryer with a slightly moist cloth. Dry with
a towel.
7. Put the baskets back inside the air fryer.
BEFORE FIRST USE
DISPLAY MESSAGES
Setting Up
Cooking program has ended.
Reminder to shake or flip food.
Air fryer is preheated and ready to start cooking.
DISPLAY DIAGRAM (CONT.)
Display
Time display
Temperature
display
WiFi
®
Indicator
1. Remove all packaging and temporary
stickers from the air fryer.
2. Place the air fryer on a stable, level, heat-
resistant surface. Keep away from areas
that can be damaged by steam (such as
walls or cupboards).
Note: Leave 5 in / 13 cm of space behind and
above the air fryer. [Figure 2.1] Leave enough room
to remove the baskets.
Note: This indicates app configuration status. See the
VeSync in-app instructions for more information.
Figure 2.1
5 in /
13 cm
5 in /
13 cm
Test Run
A test run will help you become familiar
with your air fryer, make sure it’s working
correctly, and clean it of possible residues.
1. Make sure the air fryer baskets are
empty, then plug in the air fryer.
2. Press Preheat. The display will show
“400°F” and “5 MIN”.
3. Press
to begin preheating. When
preheating is done, the air fryer will
beep.
4. Pull out the baskets and let them cool
for 5 minutes. Then place the empty
baskets back in the air fryer.
5. Press
to select the Steak preset.
The display will show “400°F” and “6
MIN”.
6. Press Temp/Time twice. The time will
blink on the display. Press the - button
once to change the time to 5 minutes.
7. Press
to begin. When finished, the
air fryer will beep.
8. Pull out the baskets. This time, let the
baskets cool completely for 10–30
minutes.