Owner Manual
7
DISPLAY
BEFORE FIRST USE
Setting Up
Controls
1. Remove all packaging from your dehydrator and its accessories. Make sure all package
contents are included (see page 3).
2. Clean the base and trays with a moistened cloth.
NOTE:
Do not wash the base or trays in a dishwasher. Do not immerse the base in water.
3. Place the dehydrator base on a solid, level surface. Plug in. Stack the drying trays on top of
the base.
4. Run the dehydrator for 30 minutes at any temperature, without adding any food. Make
sure that the room has sucient ventilation, in case the dehydrator produces any smoke or
smells. This is normal.
5. Rinse the trays in water. Dry all parts.
NOTE:
You only need to do this the first time you use the dehydrator.
• Press START/STOP to start or stop the dehydrator.
• Press TEMP/TIME once and use the
+ and – buttons to change the temperature.
• Press TEMP/TIME a second time and use the
+ and – buttons to change the time.