User's Manual

14
Automatic PreheatVeSync App Functions
Remote Control
Cooking Function Customization
In-App Recipes
Third-Party Voice Control
Air Fry, Bake, Broil, Roast, Pizza, and
Cookies all use automatic preheat.
The VeSync app allows you to access
additional smart functions, including those
listed below.
1. When you start the cooking function by
pressing START/PAUSE, preheating will
start automatically. The START/PAUSE
button will light up, and the display will
show “ “.
2. When preheating is finished, the oven
will beep several times and the display
will flash. This will repeat every minute.
The START/PAUSE button will keep
blinking until cooking is started.
Setting
Temperature
Automatic
Preheat Time
300°F / 148°C
or below
2–4 min
325°F / 163°C 3–5 min
350°F / 178°C 4–6 min
400°F / 205°C
and above
6–8 min
3. Open the oven door to place food
inside, then close the oven door to start
cooking automatically. You can also
press START/PAUSE to begin cooking
if the food is already in the oven. The
button will light up, and the display will
show the timer counting down.
• All oven functions can be controlled
remotely (except for starting cooking,
for safety reasons).
• Cooking progress can be monitored
from a distance.
• Cooking function settings can be
changed or reset to default.
• Pre-programmed recipes made by
Cosori’s in-house chefs are available
in the app. These recipes automatically
set the recommended time and
temperature.
• Create and save custom recipes.
• Compatible with Amazon Alexa and
Google Assistant
™
for voice commands.
Note: The VeSync app is continually updated and
app features will expand.
• Pressing START/PAUSE again
during preheating will cancel
preheating and immediately start
cooking.
• Preheating times vary based on the
temperature setting (see chart).
• After 10 minutes of inactivity, the
cooking function will cancel, the
oven will stop heating, and the
display will reset.