User's Manual

20
1. Insert wire rack at mid position and
close the oven door.
2. Turn the control knob to “PIZZA”, which
will blink on the display. Press the
control knob to confirm your selection.
3. Optionally, customize the temperature
and time. You can do this anytime
during cooking (except during
preheating).
4. Press to begin. Preheating will
start automatically. The button will
light up, and the display will show
“PREHEAT”.
8. The oven will stop heating and beep
several times when finished.
5. When preheating is finished, the oven
will beep several times, the display
will flash, and the button will blink
continuously.
6. Remove any cardboard, plastic, paper,
or other flammable materials. Place
pizza on a pan, and place the pan on
the wire rack.
7. Close the oven door to begin cooking
(or press or the control button if food
is already inside). The button will
light up, and the display will show the
timer counting down.
Pizza Function (“PIZZA”)
This function melts and browns cheese and
toppings while crisping crust.
Heating Elements: Top and bottom heating
elements cycle on and o.
Rack Position: Mid
a. Press once to control
temperature. Turn the control knob
to adjust the temperature between
150°–450°F / 66°–232°C.
b. Press again to control time.
Turn the control knob to adjust the
time between 1 min–6 hr.
Note: Try a slightly longer cooking time for pizzas
with thicker crust, and an even longer cooking time
for frozen pizzas.
Note: Pressing again during preheating will
cancel preheating and immediately start cooking.
Note: For large pizzas, open the oven door halfway
through cooking and carefully turn the pizza 90
degrees for more even browning.