User's Manual

11
COOKING WITH YOUR SMART AIR
FRYER TOASTER OVEN
CAUTION:
• The outer surface of the oven, including
the oven door, is hot during and after use.
Temperature may be over 212°F (100°C).
Do not touch hot surfaces. Use handle.
• Always use heat-resistant gloves,
pads, or oven mitts when handling hot
materials, and when placing items in or
removing items from the oven.
Note: Always make sure the crumb tray is properly
in place at the bottom of the oven when cooking.
Note: You can use the VeSync app to control your
smart air fryer toaster oven, follow in-app recipes,
and more.
Cooking Functions
Customizing Cooking
Functions
Cooking functions are programmed with
an ideal time and temperature for cooking
certain foods. For more information on each
cooking function, see its individual section,
or the Cooking Functions Quick Reference
Chart (see page 12).
1. When the oven is not cooking or
is paused, turn the control knob
to select the function you want to
change. Press the control knob to
confirm your selection.
2. Select the settings you want to set
as default.
• You can customize a cooking function’s
default settings, including time and
temperature.
• To change a function’s default settings:
• To reset one function:
• To reset all functions:
a. For Toast, turn the control knob
to change the darkness level.
For Preheat, turn the control
knob to change the temperature.
b. For other functions, press the
button to switch between
controlling time and temperature,
and use the control knob to adjust
the time and/or temperature.
c. Press PREHEAT to add/remove
automatic preheating.
3. Press and hold the control knob for 5
seconds until the oven beeps 1 time.
1. When the oven is not cooking or
is paused, turn the control knob
to select the function you want
to reset. Press the control knob to
confirm your selection.
2. Without making any changes, press
and hold the control knob for 5
seconds until the oven beeps 1 time.
1. Press and hold SHAKE for 5 seconds.
This will reset all presets.
Note: You can also customize and reset functions
using the VeSync app.
Top Position
Mid
Position
Low
Position