User Manual

27
Clean air fryer accessories (including trays,
etc.) and air fryer interior after every use.
CARE & MAINTENANCE
Cleaning the Accessories
Storage
1. Apply non-abrasive liquid cleanser or
a mild spray solution to a soft, damp
sponge or soft, plastic scouring pad (not
the accessory surface). Wipe accessories
and soak in warm, soapy water if
necessary.
2. For stubborn grease:
a. In a small bowl, mix 2 US tbsp / 30 mL
of baking soda with 1 US tbsp / 15 mL
of water to form a spreadable paste.
b. Use a sponge to spread the paste on
the trays and scrub. Let the trays sit for
15 minutes before rinsing.
c. Wash trays with soap and water.
3. Dry thoroughly.
4. Replace the drip tray into the air fryer
before plugging in or turning on the air
fryer.
1. Clean and dry the air fryer and all
accessories.
2. Insert the drip tray into the air fryer. Insert
the rack at mid position. Make sure the air
fryer door is closed.
3. Store the air fryer in an upright position.
Do not store anything on top.
1. Before cleaning, turn o and unplug the
air fryer, and allow it to cool completely.
Open the door for faster cooling.
2. Apply non-abrasive liquid cleanser or a
mild spray solution to a soft, damp cloth
or sponge (not the air fryer surface) and
wipe all parts of the air fryer, especially the
air fryer interior. Do not use a dry cloth on
the display screen, or it may be scratched.
Note:
• Do not use abrasive cleaners, metal scouring
pads, or metal utensils on any part of the air
fryer, including trays and other accessories.
These will scratch or damage their surfaces.
• This air fryer contains no user-serviceable
parts. Any repairs should be performed by an
authorized service representative.
Note: After each use, slide out the drip tray and
discard crumbs.
Note: Make sure you clean the top of the air
fryer interior after every use. If this is not cleaned,
cooking residue will burn onto the air fryer interior
and be dicult to remove.
3. To clean the glass door, use a glass
cleaner or mild detergent and a soft,
damp sponge or soft, plastic scouring
pad.
4. Let all surfaces dry completely before
plugging in or turning on the air fryer.