User's Manual

8
CONTROLS
• Press to turn the grill on/o.
• While the grill is cooking or paused, press
to cancel cooking. The grill will return to
standby.
• Press and hold for 5 seconds to pair with
the VeSync app. See the VeSync in-app
instructions for more information. (see
page 11)
• Press and hold for 15 seconds to reset
the grill to factory settings. This will
disconnect the grill from Wi-Fi
®
, remove
the grill from the VeSync app, and restore
all default cooking function settings.
• Press + or – to adjust temperature in
increments of +/- 5°F.
• Press and hold to adjust in increments of
+/- 15°F.
• Press and hold both + and - for 5 seconds
to switch between Fahrenheit and Celsius.
• Press to start or stop a cooking function.
• Press to resume cooking after pausing.
• Press + or – to adjust cooking time.
• Time will adjust in increments of +/- 5
minutes.
• Press to add or remove preheat before or
during cooking.
• Preheat cannot be used with the
Dehydrate function.
• Preheat time is calculated automatically
but can be adjusted using the Time
button.
• Press to add or remove a Shake Reminder.
• The Shake Reminder will appear halfway
through the remaining cooking time.
The grill will beep, and “ ” will blink
on the display. This will repeat every 60
seconds until you open the lid to flip food
or press the button again to remove the
Shake Reminder.
• The Shake Reminder cannot be added to
the Dehydrate function.
• For more information on shaking, see
Shaking Food (page 24).
• Press to select the Air Grill function.
• Press repeatedly to cycle through heat
settings.
• Press before or during cooking to select
the Keep Warm function.
• If selected, Keep Warm function will begin
after cooking time is over.
• Keep Warm function defaults to 140°F
for 5 minutes, but can be adjusted on the
VeSync app.
• Keep Warm cannot be added to the
Dehydrate function.
Power Button TEMP Button
START/PAUSE Button
TIME Button
PREHEAT Button
SHAKE Button
AIR GRILL Button
KEEP WARM Button