4449949CL(Green) 4452049CL(Black) 4455349CL(Ivory) Upholstered Bed King Weight Limit: Bed: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/replacement-parts or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. KT.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
Parts D A1 Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Headboard X1 Back fabric Panel X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts Replacement Parts, visit C B A E www.dhpfurniture.com/eng/replacement-parts F This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Headboard Footboard X1 Side Panel X2 X1 Center Rail Side Rail Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts IMPORTANT: Below part numbers list is unique to your product. Please keep it on hand when calling for replacement parts.
2 1 3 Hardware Pack 5 4 Hardware Pack #: T4449949CL-00 1/4" X 3/4" X 38 1/4" X 1 3/16" X6 1/4" X 1 9/16" X14 5/16" X 1 9/16" X16 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 A Attach A to D with .
Step 2 Attach I X 3 to A and D with .
Step 3 Attach E to C with . Repeat the same step for remaining parts E and C. C The slat holes on part E should be facing upward.
Step 4 Small holes of slot on S and T should be facing upward. T Attach S and T to C with . Repeat the same step for remaining parts C, S and T.
Step 5 Z Attach Z x 4 and H x 4 to A and B.
Step 6 2 Screw into A and into B, leave half of the thread exposed. Do not completely tighten the BOLTS, leave half of the thread exposed.
Step 7 A Hang sub-assembly C on A and B as illustrated, don't completely tighten the bolts until STEP 10 is complete.
Step 8 Attach L x 2 to F with . Repeat the same procedure for remaining part L x 2 and F.
Step 9 A Attach F x 2 to A and B with .
Step 10 E Attach G to E x 2 and F x 2 with , Then properly tighten all the bolts.
Step 11 X X P1 P1 E 11.1 Insert P1 into X, 11.2 Press X into E, repeat the same procedure for the opposite side of the bed with a new P1 and X into E. Follow the same procedures going backwards for evety row of slats. 11.2 11.1 SLAT WARNING E P1 P1 X Correct: Slat curve should be facing upwards. Incorrect: Slat curve facing downwards.
Step 12 P1 Y Y P1 P1 P1 F Y P1 12.1 P1 Y F 10.1 Insert Y x 2 onto the free end of both P1 assembled in previous step, Take a new P1 and insert each end into the other free end of Y x 2; 10.2 Press Y x 2 SIMULTANEOUSLY into F x 2 as illustrated. Follow the same procedure going backwards for every row of slats. F 12.2 SLAT WARNING Y Y Correct: Slat curve should be facing upwards. P1 F Incorrect: Slat curve facing downwards.
Step 13 Stick A1 to the back of A and D with Velcro as illustated D A A1 19
Weight Limit: 500 Lb / 227 Kg Helpful Hints ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old. ● Prohibit jumping and horseplay on this bed.
4449949CL(Verde) 4452049CL(Negro) 4455349CL(Marfil) NO LO REGRESE A LA TIENDA ! King Visite www.dhpfurniture.com/spa/replacement-parts o llame gratis al 1-800-267-1739 Cama Tapizada Fecha de compra Número de lote Gracias por su compra DHP! Información sobre la garantía DHP garantiza que este producto está libre de defectos de fábrica en la mano de obra y el material y se compromete a solucionar dichos defectos.
Partes Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts IMPORTANTE: la lista de números de pieza que aparece a continuación es exclusiva de su producto. Por favor, manténgalo a mano cuando solicite piezas de repuesto. Este artículo se embala en 2 cajas! Todas las partes enumeradas en la tabla a continuación están en el Cuadro A. Si falta el recuadro B, póngase en contacto con su distribuidor.
Paquete de componentes Paquete de componentes #: T4449949CL-00 Nota: Por favor no apriete completamente las piezas hasta que el ensamblaje sea completado, a menos de que se indique específicamente en las instruccíones de paso a paso. Paso 12 12.1 Inserte Y x 2 en el extremo libre de ambos P1 ensamblados en el paso anterior. Tome un nuevo P1 e inserte cada extremo en el otro extremo libre de Y x 2; 12.2 Presione Y x 2 SIMULTÁNEAMENTE en F x 2 como se ilustra.
Límites de peso: 500 Lb / 227 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
4449949CL(Vert) 4452049CL(Noir) 4455349CL(Ivoire) NE RETOURNEZ PAS AU MAGASIN ! Très grand lit deux places Visitez www.dhpfurniture.com/fre/replacement-parts ou appelez au 1-800-267-1739 Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Lit Rembourrée Date d'achat Numero de lot CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Pièces Pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts S IMPORTANT: La liste des références ci-dessous est propre à votre produit. T Veuillez le garder sous la main lorsque vous appelez des pièces de rechange. H X Cet article est emballé dans 2 boîtes! Toutes les pièces énumérées dans le tableau ci-dessous se trouvent dans la case A. Y Si la case B est manquante, veuillez contacter votre revendeur.
Quincaillerie Emballage coque #: T4449949CL-00 Remarque: Ne serrez pas complètement les boulons jusqu'à ce que l'ensemble est achevé, sauf indication contraire dans les intructions étape par étape. Étape 12 12.1 Insérez Y x 2 sur l'extrémité libre des deux P1 assemblés à l'étape précédente, prenez un nouveau P1 et insérez chaque extrémité dans l'autre extrémité libre de Y x 2; 12.2 Appuyez SIMULTANEMENT sur Y x 2 dans F x 2, comme illustré.
Limite de Poids: 500 Lb / 227 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
